My KitchenAid Stand Mixer Will Not Turn On

Mixers are one of the most essential kitchen appliances because they assist us to prepare a wide range of foods and juices. Any household would almost certainly have at least one mixer, demonstrating why it is such an essential appliance.

Many brands manufacture high-quality mixers that provide outstanding results, but we’ll concentrate on one brand today: KitchenAid. KitchenAid has been around for a long time and has a reputation for producing high-quality, performance-oriented goods. It is commonly deployed in the industry, and consumers are delighted with the services it offers.

Almost every appliance is prone to have problems in their lifetime of usage and therefore KitchenAid Stand mixers are also going to be causing troubles at some point in time. However, you don’t have to worry because the troubleshooting is quick and very simple. These appliances are expensive and they are manufactured in a way that they last for a long time but some problems can still take place like the KitchenAid stand mixer doesn’t turn on at all.

Today we are going to look at some of the possible reasons why your KitchenAid stand mixer will not turn on. We will also cover the ways to troubleshoot this issue altogether. If you own a KitchenAid stand mixer then this article is going to be very helpful at some point.

Some of the most common reasons

Overheating issues

The KitchenAid mixer can perform a lot of heavy-duty jobs however if it gets overheated the use and care guide of KitchenAid states that the mixer will turn off for a short time if overheating occurs.

This type of incident is possible while you are grinding something that is too hard or contains a viscous mixture of ingredients. Ingredients like bread, dough, ground meat, or cookie dough at very high speed. The user manual provided by your mixer and the manufacturer states that in such case you need to turn your mixer off for at least 20 seconds and try turning it on again if the problem persists then you should wait for the mixer to cool down for 30 minutes.

If the problem isn’t fixed even after the completion of 30 minutes then the problem can be with something else and you need to start checking. You can ask for help from a professional to find out the exact cause of this happening.

Check the power and outlet

Most of the time it happens that the mixer is working fine but the power or the cord can be the problem. A mixer most probably is attached or plugged into a GFCI power outlet.

This type of outlet trips whenever the appliance overheats. This tripping might be the reason why your mixer is unable to work properly or it’s not at all turning on. Two buttons are vertically arranged in the GFCI outlet. All you need to do is test the outlet and for that, you need to press the top button, if the outlet is working properly then you will hear a click that states it has tripped when you click the top button. After that, you need to press the bottom button that will restore the power.

If there is no clicking sound when you pressed the top testing button then the outlet has tripped and you need to restore the power by clicking the bottom button. If a GFCI is deactivated, when you push the reset button, you can hear a sound. If you can not do so, this ensures the circuit has no power and the breaker may have tripped in the main panel controlling the circuit. Find and reset the breaker. The GFCI can reset after resetting the disruptor, however, it will not reset another GFCI on the same circuit.

Servicing the mixer

If you have already checked the above-mentioned possibilities then there is nothing left now you need to detach all the parts and disassemble the mixer to point out the real problem.

You can disassemble the mixer using a user manual that is provided by KitchenAid along with your stand mixer. The first thing that you need to make sure that before disassembling your mixer you have to check whether the mixer is under warranty or not. If it is under the one-year limited warranty period then you can contact the KitchenAid service centers and they will rectify the issues.

If the breaker doesn’t start then these parts can be at a fault

The below mentioned are some of the most common parts that have been at fault when a KitchenAid mixer fails to run.

The speed control plate

You need to make sure that all the cords are properly connected to the speed control plate. If you see any damaged wiring then you should replace it and if there is any loose wiring then it should be reconnected adequately.

The phase control board

What you did for the speed control plate is what you need to do here too.

The carbon motor brushes

If the brushes are worn down then you have to replace them as soon as possible.

The wiring

If there are any damaged wires or cords present inside the mixer then they need to be replaced as soon as possible as they can lead to more damages to your KitchenAid mixer.

You can buy a new KitchenAid stand mixer here, click to check the price

How to prevent your KitchenAid mixer from overheating?

KitchenAid mixers are extremely versatile and useful and they can carry out a lot of heavy tasks on their own but this doesn’t mean that you will just put all the ingredients in and let it work for longer durations.

When the KitchenAid mixer contains heavy ingredients and runs for a long time there is a possibility that it can overheat so you need to make sure that it shouldn’t run for more than 10 minutes when there are heavy ingredients present. You can let your mixer rest for sometime before using it again and this can prevent overheating issues. You can run it for 20 minutes in case of lighter ingredients.

Make sure that you do not start the mixer when it is at the highest speed. You should start the KitchenAid mixer at the lowest settings and then you can adjust accordingly as per your requirements. Also make sure to monitor the process and stay close to the mixer.


These were some of the main reasons why your KitchenAid mixer won’t turn on. I have also mentioned the troubleshooting ways. You can ask for help from an expert in case you are unable to fix the issue.

I hope this article was useful and informative.


Similar Posts